For trees to grow healthy, they need a lot of maintenance. Several different activities are involved in maintenance, and one of them is pruning, which is also called trimming. The environment provides natural pruning to trees that exist in the wild. However, for trees that are grown as part of landscape, proper maintenance must be provided to ensure proper structural integrity as well as aesthetic appeal. This is worth knowing about Round Rock Tree Trimming.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
When trimming, it is important to be careful which branches are removed and which ones are not. With every cut, the potential of the plant to grow is affected in some way. Thus, no branch should be removed without a reason for doing so. Thus, one should consider the three main reasons why branches are removed. These reasons include improving form, reducing risk, and removing dead branches.
Other reasons why branches should be removed is to increase the amount of air and light that penetrates to the crown of the underlying landscape. In case of mature trees, branch removal is done as a preventive or corrective measure. This is because it has been determined that routine thinning does not necessarily result in any improvement in health. Before starting this job, it is important to carry out a thorough inspection of the plant involved.
Determining the branches to remove and the ones to retain should be done by inspecting the tree from top downwards. The same approach should be adopted when pruning. Pruning from top downwards prevents one from removing branches that should not be removed. To avoid doing damage, not more than 25 percent of all branches should be removed at once.
While removing branches, those that are too huge compared to the main trunk are to be targeted. A branch is supposed to be about 30 percent or smaller in comparison to the main trunk. The reason for this is to guarantee safety while reducing the danger of falling. In case the tree is deciduous, the branches are not supposed to be cut beyond 30 percent of its height from the ground.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
It is crucial that the biology of trimming is understood well in order for trimming to be handled properly with no damage happening to the tree. Handling the task wrongly may cause serious damage to the plant whose recovery may not be possible throughout its whole lifespan. Also, the damage can considerably shorten the lifespan of the tree in question.
When trimming, it is important to be careful which branches are removed and which ones are not. With every cut, the potential of the plant to grow is affected in some way. Thus, no branch should be removed without a reason for doing so. Thus, one should consider the three main reasons why branches are removed. These reasons include improving form, reducing risk, and removing dead branches.
Other reasons why branches should be removed is to increase the amount of air and light that penetrates to the crown of the underlying landscape. In case of mature trees, branch removal is done as a preventive or corrective measure. This is because it has been determined that routine thinning does not necessarily result in any improvement in health. Before starting this job, it is important to carry out a thorough inspection of the plant involved.
Determining the branches to remove and the ones to retain should be done by inspecting the tree from top downwards. The same approach should be adopted when pruning. Pruning from top downwards prevents one from removing branches that should not be removed. To avoid doing damage, not more than 25 percent of all branches should be removed at once.
While removing branches, those that are too huge compared to the main trunk are to be targeted. A branch is supposed to be about 30 percent or smaller in comparison to the main trunk. The reason for this is to guarantee safety while reducing the danger of falling. In case the tree is deciduous, the branches are not supposed to be cut beyond 30 percent of its height from the ground.
Most trees usually have a single trunk. As such, one should take time to identify which one is the main trunk in case there are multiple trunks. Before one moves to prune for form, they should remove any defective parts that can be identified. Cuts that result from the process can be painted to improve aesthetics. However, it is important to note that painting does not prevent decay in any way.
A person must assemble all the necessary tools before starting the job. The tools must be in proper condition and well sharpened. For branches that are so high a pole pruner would do. All major work that needs to be handled must be entrusted to a professional arborist.
About the Author:
Round Rock tree trimming services provide customers with everything they need to keep their gardens in tip top condition. To read our customer reviews now click here http://www.keepaustingreen.com/tree-services/tree-trimming.
No comments:
Post a Comment